Removing Rust Staining from Internal and External Stone Paths and Patios

Removing Rust Staining from Internal and External Stone Paths and Patios

Always follow instructions on the product labels, technical information and videos.

Always test products on a small area first.

Call us on 1-800-864-5625 if you have any queries.

 

 

 

 

 

It is essential that you understand which stones can be treated with acidic products in order to remove rust and which cannot. Read the following, call us if there are any queries and make sure you do small test areas. This is YOUR responsibility. 

Some stones such as granite, slate and sandstones can become discoloured due to a natural iron content oxidising (Rusting). This can cause brown marks or, in the case of grey or black granite, dark patches.

A common cause of this issue being rapid and / or severe is the use of hydrochloric acid contained in brick and patio cleaners. Never use these products on natural stone.

Another common cause of small, brown rust marks is the use of lawn feed and weed type products. These contain ferrous sulphate which can cause marks; do not leave the pellets on your stone!

Rust stains can be caused by rusty water running off iron or steel tools or fixtures that are oxidising (Rusting). 

Initially, on acid resistant stones such as most sandstone, most granite and most slate use AcidClean. Test small areas first.

Refer to full product technical guide on the product page

 

 

How useful was this article?
10 / 100
Please tell us if you found this article useful
Thank you

Back to Product Guidance & Assistance
Products used in this article
NEED SOME ADVICE?

Send us a picture of the problem and we will give you the benefit of 25 years of experience